We have put together a simple 12 volt powered smoke detector and notification unit for your trailer.
Purchase and install this kit to help you possibly save your trailer and equipment from a possible fire loss while traveling.
Connect the strobe combo siren on the outside of your trailer, on the drivers side. Should smoke be detected inside the trailer, the siren and strobe light will go off, alerting the driver. If the driver is pulled over for the evening or eating, those nearby can also be alerted.
We have 3 different options for wiring to best suit your needs.
1: Stand alone unit and NOT used with a PTS-2 alarm
2: Not wired into a PTS-2 alarm but wires to a cellular unit.
3: Wired into the alarm (alarm MUST be armed for this method to set off the strobe and send alerts if you have an alert system)
Kit includes:
Smoke detector
Strobe combo 120 db siren
Features
Photoelectric detection to reduce false alarms (i.e. cooking in the kitchen)
Sensitivity control inside detector.
Automatic reset when smoke dissipates or Latch until reset.
LED Light
1 Flash: Automatic Test Check
Solid LED: Alarming
After you purchase this and install it,
TEST THIS UNIT
before it is needed!
Reminder, this is a 12 volt system and it is up to you to maintain the power to this unit.
-- Detector Specifications --
Voltage: 12v DC (12 Volts)
Alarm Piezo Speaker Onboard
Current: =10uA (Standby); =15mA (Alarming)
Best Working Temperature: 14°F – 140°F (-10°C – 60°C)
Work humidity: =95%RH
-- Detector Dimensions --
Sensor: Diameter: 4.06 x 2.17 inches (Diameter: 103mm x 50mm)